Tubes and cylinders
Lid or base disc with tabs
Round disc with a crease line and surrounding glue flaps; the flaps are folded through 90° and glued to the inside of the tube wall. Tab count follows from tab width and a nearly straight crease line for each tab.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Lid or base disc with tabs
- Category
- Tubes and cylinders
- Dimension reference
- Nominal size
- Default dimensions
- 30 × 80 × 10 mm
- Parameters
- 2
- Version
- v1
- Template ID
- tube.disc
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Height | 30 mm | 10–200 mm |
| Diameter | 80 mm | 20–300 mm |
| Overlap | 10 mm | 0–50 mm |
Parameters of this construction
2 parameters with default value and limits, adjustable in the editor.
| Parameter | Default | Range | Note |
|---|---|---|---|
Tab depthdiscTabDepth | 10 mm | 5–25 mm | Depth of the glue flaps from the crease line; no greater than the tube wall height. |
Tab widthdiscTabWidth | 12 mm | 6–25 mm | Desired width of the tabs along the circumference; on small discs, the tabs become narrower so each crease line remains nearly straight. |
Assembly
Pre-break the crease line, fold all flaps inward, apply adhesive to the outside, and press the disc flush into the tube wall or tube end.
Reference note
Reference classification still pending
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Related templates
Customise the Lid or base disc with tabs in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.