Drink pouch

Stand-up drink pouch with a marked straw puncture point at the upper right on the front, a wide top seal, and bottom gusset; side seams, top seam, and Doyen corners are seal zones.

Retail

Open in editor Full catalogue

Opens the online editor with this template. Try it without payment details; export with Pro.

Dieline: Drink pouch — Vector preview from the catalogue, default dimensions

Dimensions and limits

Default dimensions of the template and the permitted range in mm.

Dimension	Default	Range
Width	110 mm	60–400 mm
Height	170 mm	80–500 mm
Corner radius	0 mm	0–10 mm

Parameters of this construction

5 parameters with default value and limits, adjustable in the editor.

Parameter	Default	Range	Note
Side seal`pouchSideSeal`	8 mm	5–20 mm	Width of the seal on the left and right; it runs through all layers and remains free of important print content.
Top seal`pouchTopSeal`	12 mm	5–40 mm	Height of the top seal, sealed after filling; with a hanging hole, at least the hole height plus twice 3 mm.
Bottom gusset`pouchGusset`	30 mm	15–80 mm	Depth of the inserted bottom gusset (half the standing area); at most one-third of the height and half the width.
Straw entry point`pouchStrawDiameter`	8 mm	5–12 mm	Diameter of the marked straw puncture point.
Straw entry distance`pouchStrawInset`	30 mm	15–80 mm	Distance from the puncture point to the upper right corner (horizontal and vertical); it lies in the print area.

Assembly

Print the film, insert and seal in the bottom gusset, seal the side seams, fill, and seal the top seam. The straw is inserted at the marked point.

Reference note

Reference classification still pending

Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.

Related templates

Customise the Drink pouch in your browser

Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.

Open in editor