Bags and pouches
Flat pouch (3-side seal)
Print mask for a film pouch without a die-cutting contour: front and back on one print sheet with a bottom fold; side and top seams are seal zones (nonprinting zone), optionally with a zipper, tear notch, and hanging hole.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Flat pouch (3-side seal)
- Category
- Bags and pouches
- Dimension reference
- Nominal size
- Default dimensions
- 120 × 180 × 0 mm
- Parameters
- 10
- Version
- v1
- Template ID
- pouch.flat
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Width | 120 mm | 60–400 mm |
| Height | 180 mm | 80–500 mm |
| Corner radius | 0 mm | 0–10 mm |
Parameters of this construction
10 parameters with default value and limits, adjustable in the editor.
| Parameter | Default | Range | Note |
|---|---|---|---|
Side sealpouchSideSeal | 8 mm | 5–20 mm | Width of the seal on the left and right; it runs through all layers and remains free of important print content. |
Top sealpouchTopSeal | 10 mm | 5–40 mm | Height of the top seal, sealed after filling; with a hanging hole, at least the hole height plus twice 3 mm. |
ZipperpouchZipper | off | on / off | Resealable press-to-close zipper; the zipper band is a seal zone. |
Zipper distancepouchZipperDistance | 35 mm | 15–100 mm | Distance from the zipper center to the top edge; the zipper sits below the top seal and above the bottom fold. |
Tear notchpouchTearNotch | on | on / off | Notch in both side seals for tearing open above the zipper. |
Notch distancepouchTearNotchDistance | 20 mm | 8–80 mm | Distance from the tear notch to the top edge; between the top seal and zipper. |
Hang holehangHole | none | none · euro · round · slot | Hole for hanging on a retail shelf: Euro slot (elongated slot with a round hole above), round hole, or slot. On cartons and the gift card holder, it is centered in a header above the top edge. |
Hole widthhangHoleWidth | 30 mm | 10–60 mm | Width of the elongated slot in the Euro slot and slot options. |
Slot heighthangHoleHeight | 5 mm | 2–10 mm | Height of the elongated slot in the Euro slot and slot options; the ends are semicircular. |
Hole diameterhangHoleDiameter | 10 mm | 3–20 mm | Diameter of the round hole or circle above the elongated slot in the Euro slot; larger than slot height for the Euro slot. |
Assembly
Print the film, fold at the bottom fold, and seal the side seams. After filling, seal the top seam; the pouch machine punches the tear notch and hanging hole.
Reference note
Reference classification still pending
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Related templates
Customise the Flat pouch (3-side seal) in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.