Bags and pouches
Flat bag
Flat bag with front and back, a bottom fold, and two side seams using glue flaps, optionally with a closure flap on the back.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Flat bag
- Category
- Bags and pouches
- Dimension reference
- Nominal size
- Default dimensions
- 150 × 230 × 0 mm
- Parameters
- 4
- Version
- v1
- Template ID
- bag.flat
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Width | 150 mm | 50–400 mm |
| Height | 230 mm | 60–500 mm |
| Corner radius | 0 mm | 0–∞ mm |
Parameters of this construction
4 parameters with default value and limits, adjustable in the editor.
| Parameter | Default | Range | Note |
|---|---|---|---|
Glue flapglueFlap | 12 mm | 8–25 mm | Width of the glued side seam or longitudinal seam. The material profile requires a minimum width. |
Glue flap angleglueFlapAngle | 15° | 0–45° | Bevel at the ends of the glue flap; facilitates folding and erection. |
Closure flapbagClosureFlap | on | on / off | Flap at the opening edge of the back, folded over the opening onto the front. |
Flap depthbagClosureFlapDepth | 30 mm | 15–80 mm | Depth of the closure flap; at most half the bag height. |
Assembly
Fold the side flaps inward and apply adhesive to their outside, fold the back over at the bottom fold, and press it down. After filling, fold the closure flap over the opening and glue or seal it.
Reference note
Reference classification still pending
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Related templates
Customise the Flat bag in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.