Bags and pouches
Gusseted bag with block bottom
Bag with two side gussets (center crease inward), longitudinal seam in the back, and a block bottom made of bottom flaps, ears, and bottom triangles; dimensions: bag width × gusset depth × height.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Gusseted bag with block bottom
- Category
- Bags and pouches
- Dimension reference
- Inside dimensions
- Default dimensions
- 120 × 80 × 250 mm
- Parameters
- 2
- Version
- v1
- Template ID
- bag.gusset
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Length | 120 mm | 60–400 mm |
| Width | 80 mm | 30–200 mm |
| Height | 250 mm | 80–600 mm |
Parameters of this construction
2 parameters with default value and limits, adjustable in the editor.
| Parameter | Default | Range | Note |
|---|---|---|---|
Glue flapglueFlap | 15 mm | 8–30 mm | Width of the glued side seam or longitudinal seam. The material profile requires a minimum width. |
Bottom flap overlapbagBottomOverlap | 15 mm | 10–40 mm | Glue overlap of the front bottom flap onto the rear bottom flaps; at most 40 % of gusset depth. |
Assembly
Glue the longitudinal seam to form a tube. Fold the bottom triangles inward, place the ears onto the bottom flaps along the diagonals, fold over the rear bottom flaps first and then the front bottom flap, and glue the overlap. To flatten, fold the side gussets inward along the center creases.
Reference note
Reference classification still pending
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Related templates
Customise the Gusseted bag with block bottom in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.