Corrugated
Corrugated sheet with creases
Rectangular corrugated blank with zero to three evenly spaced creases: flat as a layer pad or cushioning, folded as an angle, U-profile, or wrap around a product.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Corrugated sheet with creases
- Category
- Corrugated
- Dimension reference
- Nominal size
- Default dimensions
- 800 × 300 × 0 mm
- Parameters
- 1
- Version
- v1
- Template ID
- corrugated.sheet
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Width | 800 mm | 50–2,400 mm |
| Height | 300 mm | 50–1,600 mm |
| Corner radius | 0 mm | 0–∞ mm |
Parameters of this construction
1 parameters with default value and limits, adjustable in the editor.
| Parameter | Default | Range | Note |
|---|---|---|---|
Number of creasessheetCreaseCount | 2 | 0–3 | Number of evenly spaced creases parallel to the height: 0 flat, 1 angle, 2 U-profile, 3 wrap; each panel remains at least 20 mm wide. |
Assembly
Use the sheet flat or fold inward along the creases and place it around the product; close a wrap with tape or strapping.
Grain direction
Flutes parallel to the creases (vertical on the blank): creases pre-break cleanly (check with the test print shop).
Reference note
similar to FEFCO 0110 · classification unconfirmed
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Frequently asked questions about this template
What dimension does 800 × 300 mm describe?
These are the width and height of the unfolded sheet. They are flat dimensions, not the inside dimensions of a finished box. Crease count and even division determine the final folded shape. Check the folded sheet around your product before deriving its inside space from one third of the width.
Can I set unequal panel widths?
No. sheetCreaseCount selects zero to three evenly spaced creases. Custom positions or unequal panels are not parameters in V1. If the product needs asymmetric folds, this construction may not be suitable. Moving lines afterward would not be a validated parameter state of this template.
What shape do two creases produce?
Two creases divide the sheet into three panels and form a U-profile in the intended folding model. One crease produces an angle, three a wrap; without creases, the sheet remains flat. Actual fit and foldability depend on the material and product and are checked on the sample.
How is a wrap closed?
The assembly description specifies tape or strapping. There is no integrated self-adhesive strip or locking closure. Choose securing to suit the shipping workflow and check it on the target corrugated board. The dieline shows the creases but does not confirm the holding force of securing added later.
Why can a small width rule out too many creases?
Each panel must remain at least 20 mm wide. With even division, the required overall width increases with crease count. The constraint minimumPanel checks this combination. MFG-005 also evaluates the machine's crease spacing. A permitted flat dimension range alone therefore does not guarantee every possible division.
Related templates
Customise the Corrugated sheet with creases in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.