Full overlap slotted container

Corrugated slotted container whose outer flaps at the top and bottom each cover the entire opening and overlap; double lid and bottom for heavy, long, or impact-sensitive goods.

Shipping

Open in editor Full catalogue

Opens the online editor with this template. Try it without payment details; export with Pro.

Dieline: Full overlap slotted container — Vector preview from the catalogue, default dimensions

Dimensions and limits

Default dimensions of the template and the permitted range in mm.

Dimension	Default	Range
Length	400 mm	50–1,200 mm
Width	200 mm	50–1,200 mm
Height	200 mm	50–1,200 mm

Parameters of this construction

3 parameters with default value and limits, adjustable in the editor.

Parameter	Default	Range	Note
Glue flap`glueFlap`	35 mm	20–60 mm	Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Glue flap angle`glueFlapAngle`	15°	0–20°	Bevel at the ends of the glue flap; facilitates folding and erection.
Flap gap`flapGap`	5 mm	0–12 mm	Gap between neighboring flaps or walls; at least approximately the material thickness.

Assembly

Glue or stitch the glue flap to the opposite wall. Erect for filling, fold in the inner bottom flaps, place the back outer flap over them first and then the front flap, and glue across the surface, staple, or tape; do the same at the top.

Grain direction

Grain direction parallel to height (check)

Reference note

Reference classification still pending

Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.

Frequently asked questions about this template

What overlaps completely in this slotted container?

The front and back outer flaps each cover the entire opening. They overlap above the previously folded inner flaps. This applies at the top and bottom. A narrow overlap strip is a different construction with its own parameter; this template shows full coverage.

Can I reduce the overlap to 50 mm?

For this ID, full coverage is built into the construction model. It has no parameter for a narrower strip. Use the slotted container with overlapping outer flaps for adjustable overlap. Do not alter the contour simply by scaling or trimming it; this would lose the documented construction status.

Which outer flap is on the outside?

The assembly description places the back outer flap over the bottom or lid first, then the front flap. The front flap is therefore the last layer closed. Check reading direction and hidden artwork areas on a marked sample, especially when both flaps are printed.

Does the double bottom prove a higher load capacity?

No. The dimension model describes the overlapping material layers and blank. It contains no confirmed load verification for your fill weight here. Material quality, gluing, and closure affect actual suitability. Agree on closure areas with your production partner and check the filled box before approval.

Related templates

Customise the Full overlap slotted container in your browser

Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.

Open in editor