Labels
Neck label
Neck label for a conical bottle neck as a conical blank from top and bottom diameter and height; as a closed ring with overlap or a partial label.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Neck label
- Category
- Labels
- Dimension reference
- Nominal size
- Default dimensions
- 40 × 30 × 50 × 6 mm
- Parameters
- 1
- Version
- v1
- Template ID
- label.neck
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Height | 40 mm | 10–300 mm |
| Top diameter | 30 mm | 10–300 mm |
| Bottom diameter | 50 mm | 10–300 mm |
| Overlap | 6 mm | 0–30 mm |
Parameters of this construction
1 parameters with default value and limits, adjustable in the editor.
| Parameter | Default | Range | Note |
|---|---|---|---|
Circumference coverageneckCoverage | 100 % | 20–100 % | Proportion of the circumference covered by the neck label; 100 % is a closed ring. Overlap requires full coverage. |
Assembly
Place the label on the neck with the shorter arc at the top and wrap it along the arcs; for a ring, glue the end over the glue strip at the start.
Grain direction
No fixed grain direction; check parallel to the body axis on curved bodies
Reference note
Reference classification still pending
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Frequently asked questions about this template
How do I measure height on the bottle neck?
The dimension model expects vertical height between the two diameter planes. Slant height is calculated from height and diameter difference. Measure both diameters at the boundaries of the intended label. This cone model does not describe a freely curved shoulder.
How do I create a half neck label?
Set circumference coverage to 50 % and overlap to 0. Coverage has a parameter range of 20–100 %. A partial label has no closed joint. Positive overlap combined with partial coverage violates the dedicated constraint.
Why isn't a rectangle enough for a conical neck?
Circumference differs at the top and bottom. The annular sector represents this difference using two arcs. A rectangle maintains a constant length along its height. The template calculates the conical blank from the two diameters; confirm actual fit on a neck sample.
What happens with nearly equal diameters?
The construction requires at least a 1 mm diameter difference and limits the blank's outside radius to 2000 mm. A very slight taper can therefore be rejected. Use the wraparound label for a cylindrical body and check the seam on the intended gluing area.
Related templates
Customise the Neck label in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.