Labels
Tapered cup wrap label
Wrap label for tapered cups and cans as a cone blank (annular sector) with a constant-width glue strip.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Tapered cup wrap label
- Category
- Labels
- Dimension reference
- Nominal size
- Default dimensions
- 90 × 90 × 60 × 10 mm
- Parameters
- 0
- Version
- v1
- Template ID
- label.tapered.wrap
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Height | 90 mm | 10–300 mm |
| Top diameter | 90 mm | 10–300 mm |
| Bottom diameter | 60 mm | 10–300 mm |
| Overlap | 10 mm | 0–30 mm |
Assembly
Position the label's starting edge along a generatrix, align the large arc with the wide opening, wrap around, and glue the end over the start with the glue strip.
Grain direction
No fixed grain direction; check parallel to the body axis on curved bodies
Reference note
Reference classification still pending
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Frequently asked questions about this template
Which arc belongs at the wide cup opening?
The larger diameter belongs to the annular sector's outer arc. In the starting cup, this is the top opening. The template accounts for taper direction and mirrors the blank accordingly. Align the large arc with the wide end when applying it.
Is height the length of the sloping cup wall?
No. The expected input is the vertical height between measured diameters. The construction calculates the generatrix from height and radius difference. If you enter the sloping length as height, the resulting blank differs. Check dimensions in the intended label area.
Can I widen the glue strip arbitrarily?
The dimension range is 0–30 mm. Inner radius and total angle additionally limit the permissible overlap. A value within the range is therefore not always geometrically possible. The starting example uses 10 mm; confirm gluing and fit with a sample made from the target material.
Does this template include the cup bottom?
No. It describes a label on the tapered body with a closed outer outline and glue strip. Bottom, container wall, and their material structure are not constructed. The template also confirms no suitability of the selected paper or adhesive for a particular use.
Related templates
Customise the Tapered cup wrap label in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.