Seal end carton

Folding carton with a side seam and glued top and bottom closures (Seal End) in place of tuck flaps: outer flap at the front, inner flap at the back, dust flaps at the sides. For pharmaceuticals and food; opened by tearing.

Retail

Open in editor Full catalogue

Opens the online editor with this template. Try it without payment details; export with Pro.

Dieline: Seal end carton — Vector preview from the catalogue, default dimensions

Dimensions and limits

Default dimensions of the template and the permitted range in mm.

Dimension	Default	Range
Length	60 mm	20–250 mm
Width	30 mm	20–250 mm
Height	120 mm	20–350 mm

Parameters of this construction

7 parameters with default value and limits, adjustable in the editor.

Parameter	Default	Range	Note
Glue flap`glueFlap`	15 mm	8–25 mm	Width of the glue flap used to glue the blank into a tube. The material requires a minimum width.
Glue flap angle`glueFlapAngle`	12°	0–20°	Bevel at the ends of the glue flap; facilitates folding and erection.
Dust flap length (ratio)`dustFlapRatio`	80 %	50–95 %	Dust flap length as a ratio of the available length.
Dust flap angle`dustFlapAngle`	20°	0–45°	Bevel of the dust flaps (also the ears on the mailer); larger angles prevent collisions during folding.
Dust flap relief`dustFlapRelief`Expert	2 mm	1–5 mm	Distance between dust flap and lid along the crease; at least the material thickness. The machine requires a minimum slot width.
Outer flap`sealOuterFlap`	100 %	50–100 %	Depth of the outer flap as a proportion of the opening width; 100 % covers the entire opening.
Inner flap`sealInnerFlap`	60 %	30–100 %	Depth of the inner flap as a proportion of the opening width. Outer and inner flaps must overlap by at least the material's minimum glue width (glue strip).

Assembly

Pre-break the blank along all creases, glue the glue flap to the inside of the back wall, and flatten it (factory). Erect at the filling facility, fold in the bottom dust flaps and inner flap, apply adhesive to the outer flap's glue strip, and press into place; close the top the same way after filling.

Reference note

Reference classification still pending

Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.

Related templates

Customise the Seal end carton in your browser

Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.

Open in editor