Counter display

Open countertop display: low front wall with a finger recess, tall back wall with an advertising area, and sloping side walls; corners are glued inside with corner glue flaps as on the tray.

Retail

Open in editor Full catalogue

Opens the online editor with this template. Try it without payment details; export with Pro.

Dieline: Counter display — Vector preview from the catalogue, default dimensions

Dimensions and limits

Default dimensions of the template and the permitted range in mm.

Dimension	Default	Range
Length	250 mm	80–400 mm
Width	150 mm	60–300 mm
Height	100 mm	40–200 mm

Parameters of this construction

9 parameters with default value and limits, adjustable in the editor.

Parameter	Default	Range	Note
Back wall height above the side walls`headerHeight`	120 mm	0–250 mm	Back wall header above side wall height; advertising area of the display.
Front wall height`frontHeight`	40 mm	20–200 mm	Inside height of the front wall; the side walls rise from it to the height at the back wall.
Front cut-out`frontCutout`	on	on / off	Round finger recess centered in the front wall's top edge for easy removal of goods.
Front cut-out radius`frontCutoutRadius`	25 mm	5–80 mm	Radius and depth of the finger recess; a web remains above the bottom and toward the corners.
Corner glue flap`cornerFlapWidth`	15 mm	8–40 mm	Width of the glue flaps at the ends of the front and back walls, glued to the inside of the end walls. The material requires a minimum width; the flaps from both sides must not meet on the end wall.
Corner glue flap taper`cornerFlapAngle`	15°	0–30°	Bevel at both ends of the corner glue flaps; the flap does not catch on the base or upper edge during erection.
Flap gap`flapGap`	2 mm	0.2–6 mm	Gap between neighboring flaps or walls; at least approximately the material thickness.
Header shape`headerShape`	straight	straight · rounded · arched
Radius or rise`headerShapeSize`	30 mm	5–150 mm

Assembly

Erect the front and back walls, fold the corner glue flaps inward, and apply adhesive to their outside. Erect the side walls and press against the flaps. Insert the goods; the back wall displays the advertising area.

Reference note

ECMA family, unconfirmed

Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.

Related templates

Customise the Counter display in your browser

Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.

Open in editor