Labels
Wrap-around label
Wrap label for cylindrical bottles and cans: length from circumference (or diameter) plus overlap; the front viewing area and overlap are marked as annotation lines.
Opens the online editor with this template. Try it without payment details; export with Pro.
- Template
- Wrap-around label
- Category
- Labels
- Dimension reference
- Nominal size
- Default dimensions
- 90 × 70 × 8 mm
- Parameters
- 1
- Version
- v1
- Template ID
- label.wrap
Dimensions and limits
Default dimensions of the template and the permitted range in mm.
| Dimension | Default | Range |
|---|---|---|
| Height | 90 mm | 10–300 mm |
| Diameter | 70 mm | 10–300 mm |
| Overlap | 8 mm | 0–50 mm |
Parameters of this construction
1 parameters with default value and limits, adjustable in the editor.
| Parameter | Default | Range | Note |
|---|---|---|---|
Front viewing areafrontFieldAngle | 120° | 30–180° | Angle of the area visible from the front, measured around the body axis; marked as annotation lines opposite the seam. |
Assembly
Position the label's start (overlap strip) vertically, pull it taut around the body, and glue the end over the start. The front lies opposite the seam.
Grain direction
Grain direction parallel to the band height, across the circumference (check)
Reference note
Reference classification still pending
Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.
Frequently asked questions about this template
Can I enter circumference instead of diameter?
Yes. The dimension model accepts a circumference or diameter. If both are given, entered circumference and π times diameter must differ by no more than 0.1 mm. Measure at the area of the container that the label will actually wrap around.
How long is the starting label?
The circumference calculated from Ø 70 mm is 219.911 mm. With 8 mm overlap, the length is 227.911 mm. Height remains 90 mm. Overlap is already included in the blank and is not added again as bleed.
Are viewing area lines creases?
No. Seam and viewing area are annotation lines for design. The label wraps around a cylindrical body and has no crease. The front viewing area parameter changes this marking, not the diameter or outline length.
Does this outline fit a tapered cup?
The rectangular blank describes a cylinder. A separate cone blank is provided for a tapered cup with different top and bottom diameters. A rectangular label does not compensate for taper; check the appropriate blank on the actual body.
Related templates
Customise the Wrap-around label in your browser
Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.