Insert with cut-out

Paperboard insert for a box: a platform with a product cut-out (rectangle, circle, or oval, freely positioned) on folded legs at two or four edges, optionally with inward-folded leg flaps. Dimensions: outside dimensions of the insert (inside dimensions of the box) × platform height.

Retail

Open in editor Full catalogue

Opens the online editor with this template. Try it without payment details; export with Pro.

Dieline: Insert with cut-out — Vector preview from the catalogue, default dimensions

Dimensions and limits

Default dimensions of the template and the permitted range in mm.

Dimension	Default	Range
Length	200 mm	40–400 mm
Width	150 mm	40–400 mm
Height	30 mm	10–100 mm

Parameters of this construction

8 parameters with default value and limits, adjustable in the editor.

Parameter	Default	Range	Note
Feet`insertFeet`	two	two · four	Folded legs at the front and back edges or at all four edges; the side legs are shorter to fit between the front and back legs.
Foot lip`insertFootLip`	10 mm	0–30 mm	Width of the inward-folded flap at the bottom of each leg (0 = none); the ends are trimmed at 45°.
Cut-out shape`cutoutShape`	rectangle	rectangle · circle · oval	Rectangle with corner radius, circle (diameter = cut-out width), or oval.
Cutout width`cutoutWidth`	80 mm	10–380 mm	Width of the individual product cut-out; also the diameter for a circle. At the selected position, at least 5 mm of web remains to the platform edge.
Cutout height`cutoutHeight`	50 mm	10–380 mm	Height of the individual product cut-out; for a circle, it follows the cut-out width. At the selected position, at least 5 mm of web remains to the platform edge.
Cutout radius`cutoutRadius`	5 mm	0–50 mm	Corner radius of the rectangular product cut-out, at most half its shorter side. Circle and oval use their own shape outlines.
Cut-out position lengthwise`cutoutPositionX`	50 %	20–80 %	Center of the cut-out as a proportion of the platform length, measured from the left; at least 5 mm remains to the edges.
Cut-out position crosswise`cutoutPositionY`	50 %	20–80 %	Center of the cut-out as a proportion of the platform width, measured from the front; at least 5 mm remains to the edges.

Assembly

Fold the legs downward at the creases and fold the leg flaps inward; place the insert in the box and the product in the cut-out. No gluing.

Reference note

Reference classification still pending

Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.

Related templates

Customise the Insert with cut-out in your browser

Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.

Open in editor