Carton tray with lock corners

Unglued folding carton board tray: front and back walls with corner flaps, double end walls with a rollover; tabs on the inner wall tuck into slots in the bottom.

Retail

Open in editor Full catalogue

Opens the online editor with this template. Try it without payment details; export with Pro.

Dieline: Carton tray with lock corners — Vector preview from the catalogue, default dimensions

Dimensions and limits

Default dimensions of the template and the permitted range in mm.

Dimension	Default	Range
Length	200 mm	40–350 mm
Width	150 mm	40–350 mm
Height	50 mm	15–120 mm

Parameters of this construction

15 parameters with default value and limits, adjustable in the editor.

Parameter	Default	Range	Note
Rim width`rimWidth`	4 mm	1–10 mm	Width of the double wall's foldover (crease to crease); accommodates the flaps in the pocket.
Flap gap`flapGap`	2 mm	0.3–6 mm	Gap between neighboring flaps or walls; at least approximately the material thickness.
Ear length (ratio)`earRatio`	80 %	50–95 %	Length of the ears or corner flaps as a ratio of half the inside width.
Number of lock tabs`lockTabCount`	2	1–3	Number of locking tabs per wall.
Lock tab width`lockTabWidth`	12 mm	5–40 mm	Width of a locking tab.
Lock tab depth`lockTabDepth`	1.5 mm	0.5–6 mm	How far a locking tab protrudes; at least material thickness plus clearance.
Bottom slot width`slotWidth`	2.5 mm	0.3–6 mm	Width of the slots in the base for the locking tabs; at least the material thickness, with clearance from the crease.
Window`window`	off	on / off
Window shape`windowShape`	rectangle	rectangle · oval
Window width`windowWidth`	100 mm	10–400 mm
Window height`windowHeight`	20 mm	10–400 mm
Window corner radius`windowCornerRadius`	4 mm	1–20 mm
Window position horizontal`windowPositionX`	50 %	20–80 %
Window position vertical`windowPositionY`	50 %	20–80 %
Film margin`filmMargin`	6 mm	3–12 mm

Assembly

Erect the front and back walls and fold the corner flaps inward. Erect the end walls over them, fold the rollover inward so the corner flaps lie in the pocket, and insert the tabs into the bottom slots.

Reference note

ECMA family, unconfirmed

Labels such as “similar to FEFCO” or “ECMA family, unconfirmed” are for orientation only. The templates are our own constructions; an assignment to a standard code is unconfirmed and not a trademark claim.

Related templates

Customise the Carton tray with lock corners in your browser

Set dimensions and material, review findings and export print-ready as PDF, SVG or DXF.

Open in editor